{"id":4512851722297,"title":"Gentex 7139 Hard Wired Wall Mount T3 Smoke Alarm with Backup","handle":"gentex-7139-hard-wired-wall-mount-t3-smoke-alarm-with-backup","description":"Hard Wired - Electrician Installation\u003cbr\u003e\u003cbr\u003eThe 7139 for wall mount is a \u003ca href=\"\/smoke-alarms%22\" target=\"blank\" title=\"read about smoke alarm technology\"\u003ephotoelectric\u003c\/a\u003e single station smoke alarm designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. This model is hard-wired so you would need an electrician to hook it up.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe smoke alarm operates on the light scattering principle a superior method of detection in smoldering fires. It has a pulsing LED light source and a photodiode sensor in a fully screened sensing chamber. When smoke enters the chamber the infrared beam is deflected onto the sensor. The LED rate increases to 8 times the normal pulse rate and after the photodiode confirms the presence of smoke for 2 consecutive pulses it will produce the signal necessary to trip the audible and strobe light alarms.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe 7139 series provides the temporal 3 (T3) evacuation tone as a standard feature. When testing it may take up to 16 seconds longer to go in or out of alarm.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cbr\u003e\u003cul class=\"disc\"\u003e\n\u003cli\u003e177 candela rating (very bright strobe light)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSolid state 90dB horn (very loud)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFull function test switch (easy for you to test that it is working)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFlashes 60 times per minute\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMeets state federal and ADA requirements\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMounting hardware for ceiling\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTemporal 3 (T3) Evacuation sounding device\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTandem connection up to 6 detectors per system\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e9V battery backup (audible alarm only)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUL Listed (USA)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003ca href=\"\/newsletter\/support\/GEN-7109CS_LS_manual.pdf\" target=\"blank\"\u003e[Click for user manual]\u003c\/a\u003e\"","published_at":"2020-02-18T13:11:58-06:00","created_at":"2020-02-18T13:11:59-06:00","vendor":"HC","type":"EQ-Smoke\/Carbon","tags":[],"price":14900,"price_min":14900,"price_max":14900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31443768279097,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"GEN-7139CSW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Gentex 7139 Hard Wired Wall Mount T3 Smoke Alarm with Backup","public_title":null,"options":["Default Title"],"price":14900,"weight":907,"compare_at_price":null,"inventory_management":null,"barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0130\/9989\/2793\/products\/GEN-7139CSC_4.jpg?v=1582053119"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0130\/9989\/2793\/products\/GEN-7139CSC_4.jpg?v=1582053119","options":["Title"],"media":[{"alt":"Gentex 7139 Hard Wired Wall Mount T3 Smoke Alarm with Backup","id":5807004254265,"position":1,"preview_image":{"aspect_ratio":1.0,"height":648,"width":648,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0130\/9989\/2793\/products\/GEN-7139CSC_4.jpg?v=1582053119"},"aspect_ratio":1.0,"height":648,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0130\/9989\/2793\/products\/GEN-7139CSC_4.jpg?v=1582053119","width":648}],"content":"Hard Wired - Electrician Installation\u003cbr\u003e\u003cbr\u003eThe 7139 for wall mount is a \u003ca href=\"\/smoke-alarms%22\" target=\"blank\" title=\"read about smoke alarm technology\"\u003ephotoelectric\u003c\/a\u003e single station smoke alarm designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. This model is hard-wired so you would need an electrician to hook it up.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe smoke alarm operates on the light scattering principle a superior method of detection in smoldering fires. It has a pulsing LED light source and a photodiode sensor in a fully screened sensing chamber. When smoke enters the chamber the infrared beam is deflected onto the sensor. The LED rate increases to 8 times the normal pulse rate and after the photodiode confirms the presence of smoke for 2 consecutive pulses it will produce the signal necessary to trip the audible and strobe light alarms.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe 7139 series provides the temporal 3 (T3) evacuation tone as a standard feature. When testing it may take up to 16 seconds longer to go in or out of alarm.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cbr\u003e\u003cul class=\"disc\"\u003e\n\u003cli\u003e177 candela rating (very bright strobe light)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSolid state 90dB horn (very loud)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFull function test switch (easy for you to test that it is working)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFlashes 60 times per minute\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMeets state federal and ADA requirements\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMounting hardware for ceiling\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTemporal 3 (T3) Evacuation sounding device\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTandem connection up to 6 detectors per system\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e9V battery backup (audible alarm only)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUL Listed (USA)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003ca href=\"\/newsletter\/support\/GEN-7109CS_LS_manual.pdf\" target=\"blank\"\u003e[Click for user manual]\u003c\/a\u003e\""}

Gentex 7139 Hard Wired Wall Mount T3 Smoke Alarm with Backup

Product Description
Maximum quantity available reached.
Hard Wired - Electrician Installation

The 7139 for wall mount is a photoelectric single station smoke alarm designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. This model is hard-wired so you would need an electrician to hook it up.



The smoke alarm operates on the light scattering principle a superior method of detection in smoldering fires. It has a pulsing LED light source and a photodiode sensor in a fully screened sensing chamber. When smoke enters the chamber the infrared beam is deflected onto the sensor. The LED rate increases to 8 times the normal pulse rate and after the photodiode confirms the presence of smoke for 2 consecutive pulses it will produce the signal necessary to trip the audible and strobe light alarms.



The 7139 series provides the temporal 3 (T3) evacuation tone as a standard feature. When testing it may take up to 16 seconds longer to go in or out of alarm.



Features:


  • 177 candela rating (very bright strobe light)
  • Solid state 90dB horn (very loud)
  • Full function test switch (easy for you to test that it is working)
  • Flashes 60 times per minute
  • Meets state federal and ADA requirements
  • Mounting hardware for ceiling
  • Temporal 3 (T3) Evacuation sounding device
  • Tandem connection up to 6 detectors per system
  • 9V battery backup (audible alarm only)
  • UL Listed (USA)

[Click for user manual]"
Sku: GEN-7139CSW

Related Products